Sony VPD-LE100 - Manual (Page 6)

Audio L/R on RCA (Phono) Connectors
RGB Computer / Component Video (Sync on Green, Composite, or Separate
Sync) on a 9 pin (D9) Connector
Audio L/R on RCA (Phono) Connectors
RGB Computer / Component Video (Sync on Green, Composite, or Separate
Sync) on a VGA (HD15) Connector with loop-through
Audio L/R on RCA (Phono) Connectors
Component Serial Digital Video on a BNC Connector with loop-through
Composite Video on a BNC Connector or Y/C Video on a 4 Pin DIN Connector,
both with loop-through
Audio L/R on RCA (Phono) Connectors
High Definition Serial Digital Video on a BNC Connector with loop-through
These optional modules shall be user-installable, without access to the inside of
the device, and shall also be installable in an optional external switching device
available from the device manufacturer.
This device shall include a 12V power output for providing power to external
devices.
8.0 Power Requirements
This device shall accept power from 220 to 240 VAC at either 50 or 60 Hz.
This device shall consume no more than 2800 watts.
This device shall emit no more than 9556 BTU.
Power to this device shall be supplied via a detachable standard power cord that
is readily available for replacement from local suppliers.