Samsung BD-P1200 - Manual (Page 23)

22 - English
C
onnecting
Connecting to Samsung's
FTP/Internet site for Software
Upgrades
1. Using the Direct LAN Cable (UTP cable), connect the
LAN terminal on the rear of the Blu-ray disc player to
the LAN terminal of your modem.
- Connect to the Internet for future software upgrades.
LAN
LAN
Modem
INTERNET
■ See pages 45~48 for the Software Upgrade
procedure.
NOTE
Connecting to an Audio System
(HDMI supported Amplifier)
1. Using the HDMI-HDMI cable (not included), connect
the HDMI OUT terminal on the rear of the Blu-ray disc
player to the HDMI IN terminal of your Amplifier.
2. Using the HDMI-HDMI cable connect the HDMI OUT
terminal of the Amplifier to the HDMI IN terminal of
your TV.
3. Turn on the Blu-ray disc player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select
external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user
manual to set the Amplifier's audio input.
LAN
■ Please turn the volume down when you
turn on the Amplifier. Sudden loud sound
may cause damage to the speakers and
your ears.
■ Please set the audio in the menu screen
according to the Amplifier.
(See pages 38~39)
■ The position of terminals may vary
depending on the Amplifier.
Please refer to the user's manual of your
Amplifier.
NOTE