Sanyo SCP-2700 - Manual (Page 14)

2 1A. Setting Up Service
ࡗ Setting Up Your Phone (page 2)
ࡗ Activating Your Phone (page 3)
ࡗ Setting Up Your Voicemail (page 3)
ࡗ Getting Help (page 4)
Setting Up Your Phone
1. Install the battery.
Ⅲ Insert the battery into the opening on the back of the
phone, making sure the connectors align (
), and
gently press it down ( ).
Ⅲ Replace the battery cover and press it down until the
latch snaps into place (
and ).
2. Press and hold to turn the phone on.
Ⅲ If your phone is activated, it will turn on, search for
service, and enter standby mode.
Ⅲ If your phone is not yet activated, see “Activating Your
Phone” on page
3 for more information.
3. Make your first call.
Ⅲ Use your keyboard to enter a phone number.
Ⅲ Press .
1A. Setting Up Service
Note Your phone’s battery should have enough charge for
your phone to turn on and find a signal, set up your
voicemail, and make a call.You should fully charge your
battery as soon as possible. See “Charging the Battery”
on page 13 for details.