Samsung VP-D200(i) - Manual (Page 64)

ENGLISH
64 64
Advanced Recording
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■ If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
■ When you wish to dub using the External A/V input, connect the
AUDIO/VIDEO cable to the camcorder by inserting the AUDIO/VIDEO cable
into the AV Jack at the right side of the camcorder.
(VP-D230i/D250i/D270i only)
-
Press the MENU button, move the MENU SELECTOR to highlight A/V and
push the MENU SELECTOR.
- Move the MENU SELECTOR to highlight AV IN/OUT and push the MENU
SELECTOR to select AV IN/OUT.
- Push the MENU SELECTOR to select AV IN.
2. Press the (PLAY/STILL) button and find the timeframe of the scene to
be dubbed.
3. Press the (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
■ A.DUB will be displayed on the LCD.
■ The camcorder is in a ready-to-dub state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
■ Press the (STOP) button to stop the dubbing.
Notes
■ You can not use the audio dubbing function while playing a write protected video tape.
■ You must use the external microphone jack size of below 11.5Ø.
■ When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from
which you wish to record. (VP-D230i/D250i/D270i only)
■ You cannot dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio dubbing (VP-D230(i)/D250(i)/D270(i) only)
FADE
BLC
TAPE /MF
MENU
S.SHOW
AV IN
Audio (R) Audio (L)
(VP-D230i/D250i/D270i only)
00709E VP-D230(i) UK (61~108) 12/1/03 9:09 AM Page 64