Sanyo VCC-WB4000P - Manual (Page 65)

PPP Settings
5
Install the Network Archiving Software
into the computer.
Note:
•
After installing the software, close the
software window.
•
Camset only makes the settings that are
required for setting up the camera.
•
Refer to the instruction manual for the
Network Archiving Software for further
details.
1
Double-click the Camset icon on the
desktop.
When Camset is opened for the first time,
no files have yet been created, so the
following message will be displayed. Click
the [OK] button. “CAMSET MAIN” will
then be displayed.
2
Click [ADD] and set the registration
details.
After the settings have been entered, click
the [OK] button.
3
Select a registration list and then click
the [SETTTING] button.
The CAMERA SETTING screen will be
displayed.
4
Enter the “CAMERA SET” and
“RECORD MODE SET” settings.
Set the camera filming and recording
conditions.
5
Enter the “LOCAL SERVER SET”
settings.
•
LOCAL SERVER USE: Set to “USE”.
•
LOCAL SERVER IP ADDRESS:
The computer that has the Network
Archiving Software installed becomes
a local server that can be accessed
via the Internet. Type in the global IP
address that has been assigned by
the ISP in this case.
•
FTP PORT NUMBER: Type in “21”.
•
FTP PASSIVE: Set to “NO USE”.
•
CAMERA-ID: Type in a unique
4-character camera name.
3
2
3
6
7
4
5
L5AM2/XE (VCC-WB4000P) GB 2004, 2, 17
– 64 – English