Samsung DVD Playe - Manual (Page 6)

Description-Front Panel Description-Rear Panel
Front Panel Display
Shows information about the operational status of
this unit.
Disc type indicators
Reverse play / Pause / Forward play
DVD : Title number
DVD : Chapter number.
Video/Audio CD : Track number
Repeat play mode
Linear PCM audio output
PAL indicator
Dolby Digital Disc
DTS (Digital Theater System) output
Lights when 3D surround is turned on.
Angle indicator. You can select multiple angles
of a scene recorded by different cameras.
MPEG-2 Audio output
MP3 Audio output
Displays various messages concerning
operations such as PLAY, STOP, LOAD, RANDOM, ...
no DISC : No disc loaded.
EJECT : The disc is open.
LOAD : This unit is loading disc information.
DISC MENU : Displays DVD menu screen.
OPTICAL
ANALOG AUDIO OUT DIGITAL AUDIO OUT VIDEO OUT S-VIDEO OUT
COAXIAL R L
10 11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Front Panel Controls
STANDBY/ON button
• Turns the power on or off. The red lamp lights up
while in the standby mode.
When power is turned on, the red lamp lights off.
Disc Slot
• Used for loading the disc or for removing the disc
using the [ ] button.
DISC IN: the indicator lights up
DISC OUT: the indicator lights off
During IN/OUT operation: the indicator flashes
DISPLAY
• Operation indicators are displayed here.
PLAY/PAUSE button
• Begin or pause disc play.
SKIP button
• Use to skip a scene or music.
STOP button
• Stops disc play.
EJECT button
• (eject) button
1
2
3
5
4
6
7
8
Rear Panel
DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
1
2
3
4
SETUP SETUP