Star Micronics 800C - Manual (Page 13)

4
Loading paper
You must always follow the
Steps below to load paper before installing the film roll.
Steps:
1. Insert the paper tray base into the
positioning holes at the back side
of the printer.
2. Fan the paper. This will prevent
paper jams from occurring.
3. Load one sheet of paper into the
paper tray base with the printing side
facing the paper tray base.
Note: Recommended coated paper will have the words "PRINT OPPOSITE
SIDE" printed in light blue letters on the back side.
4. After one sheet has been inserted all the
way into the printer, add the remainder
of the stack of paper.
Note: The paper tray can hold up to 50 sheets of coated/presentation grade
paper at one time. Be certain to insert the print media with the print
side facing down when inserting into the printer.