Philips Saeco Magic Comfort Plus - Manual (Page 17)

17
ENGLISH
PROGRAMMING MACHINE FUNCTIONS
RINSING CYCLE
TIMER
DESCALING
The machine will carry out
a rinsing cycle.
When the cycle is
completed this message
will be displayed:
This function is used to rinse all the coffee-dispensing parts
with water.
The rigsigg cycle cagg t be igterrupted.
A pers g must be presegt durigg this perati g.
Use the buttons to adjust
the timer setting.
This is a factory-set function that automatically switches the
machine into “Standby” when 3 hours have elapsed since a
coffee was dispensed.
The switch-off time can be adjusted, in 15-minute intervals, to
a minimum of 15 minutes; the function cannot be deactivated.
Prepare the machine for
descaling.
This function enables you to activate an automatic
descaling cycle. See page 10.
Wargigg: a large quagtity f water may be discharged fr m the
c ffee brew ugit. Bef re startigg, empty ut the drip tray agd
keep ag additi gal c gtaiger hagdy.
When the function
appears, select it using the
“menu” button.
When the function
appears, select it using the
“menu” button.
When the function
appears, select it using the
“menu” button.
Press the “menu” button to
confirm your choice.
Press the “menu” button to
confirm your choice.
DESCALING *
SIGNAL DESCALING
DESCALING
FILL WATERTANK
TIMER *
RINSING CYCLE
STANDBY
AFTER 2:45
STANDBY
AFTER 1:15
RINSING CYCLE *
FACTORY SETTINGS
RINSING CYCLE *
FACTORY SETTINGS
FILL WATERTANK
DESCALING
FILL WATERTANK
0361_95x Magic Comfort Plus_A5_Rev00.indd 08/09/2003, 23.42 17