Wash-to-dry, Wash, Before starting a cycle – Splendide 7100XC User Manual

Page 17: Determining load sizes, Setting a, Cycle

Advertising
background image

Washing and drying

17

Before starting a cycle

Always make sure,

the drum is loaded correctly (see below)

the door is closed

the ON-OFF button has been pressed and machine

power is ON

laundry aids have been added to the Dispenser

Drawer (see below)



IMPORTANT

: DO NOT attempt to open the

door when the ‘Door Lock’ LED (D) is LIT SOLID!

Bleach

(with bin)

Prewash

Detergent

(without

bin)

1 to 2 TBSP

Powder

Detergent

(or liquid

equiv.)

1 to 2 TBSP

Liquid

Fabric

Softener

Determining load sizes

Maximum WASH CYCLE capacity - Cottons: 15
lbs, Synthetics: 9 lbs, Delicates: 8 lbs, Wools: 3 lbs

Maximum DRY CYCLE capacity - 8 to 11 lbs.
Always allow space for air to flow around the
clothes when drying. In general, if your drying,
don’t fill the drum more than 1/2 to 3/4 full.

Setting a

wash-to-dry

cycle

1) Select the wash cycle

select a washing cycle using the

Cycle Selector;

select the wash water temperature using the
WASH TEMP knob;

press available OPTION buttons (optional);

2) Select the dry time

select the drying minutes or one of the AUTO

cycles by using the DRY TIME knob; (NOTE:
Average loads will dry in 60 to 80 minutes)

3) Press the START button. When the wash cycle

ends, the appropriate dry cycle will start
automatically

Setting a

wash

cycle

1) Select the wash cycle (See above);

2) Select the dry time

set the DRY TIME knob to ‘OFF’;

3) Press the START button. When the wash cycle

ends, the machine will stop.

Setting a

dry

cycle

1) Select the dry cycle

set the

Cycle Selector

to position 5, 10, or 13;

2) Select the dry time

select the drying minutes or one of the AUTO
cycles by using the DRY TIME knob;

3) Press the START button. When the dry cycle

ends, the machine will stop.

Advertising