Sanyo PLC-WXE45 - Manual (Page 10)

10
Top Panel
① ② ③
③ LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end. (pp. 57, 64)
② WARNING indicator
Emit a red light when the projector detects
abnormal condition. This also blinks red
when the internal temperature of the projector
exceeds the operating range. (pp. 54, 64)
① POWER indicator
It turns red when the projector is in the stand-by
mode.
It remains green while the projector is under
operation.
(pp. 18, 64)
Antitheft Alarm Settin� Buttons
① ②
③
② Buttons 1-
Used for Antitheft alarm setting.
③ ALARM indicator
Blinks red to indicate the battery condition or
key operation.
① F button
Used for Antitheft alarm setting.
These buttons are used for Antitheft alarm function.
(pp. 51-53)
Part Names and Functions