Sennheiser 502011 - Manual (Page 15)

12
Putting the Set 840 S system into operation
Connecting the induction loop or headphones
for hearing aids to the receiver
The socket 5 of the receiver allows you to connect
• the supplied induction loop R ,
• headphones or
• a connection cable to your hearing aid or to induction
couplers.
Connecting the induction loop
̈ Carefully remove the clip P from the receiver.
̈ Attach the clip of the induction loop as shown.
̈ Connect the induction loop R to the socket 5 of the
receiver.
̈ Set your hearing aid to position “T”.
If your hearing aid has no position “T”, please contact your
hearing aid acoustician.
For alternative connection possibilities to your
hearing aid as well as the connection to cochlea
implants, please contact your hearing aid acoustician.
EZT 3011
5 R