Solid State Logic C100 HD Range - Manual (Page 7)

www.solid-state-logic.com
C100 HD Range. This is SSL.
Intuitive Touchscreen Control
“The C100 certainly is a great board for us,
because of its 5.1 capability, its flexibility, and
most important, the sound quality. It’s been a
major benefit.”
Michael Narracci, NESN
NESN Truck
“It is very flexible and easy to operate and,
because it has a flexible signal router, our
engineers don’t need to patch regular programs,
thus saving an enormous amount of time.”
Tetsuo Ueno, Chief Engineer, NHK Sapporo, Japan
NHK Sapporo
Comprehensive Channel Display
Typical Channel Information Display
The Channel Information screen provides a
wealth of feedback about the signal, routing
and processing, laid out in a clear and logical
fashion. Each screen displays 8 channels
simultaneously, with a more detailed view of
the processing across the lower part of the
screen, automatically following the channel
which has its attention (ATT) button pressed. Each channel shows the fader number, source
name and DSP channel in use, dynamically
updated when a change is made
The meter may be sourced from one of 6
points in the channel, indicated here above the
Dynamics Gain reduction meter
5.1, stereo and mono channels may be
arranged in any order, and clearly identified
5-way processing order is shown as icons, with
bypassed processing ‘greyed out’
Indicators for the 24 Utility busses are shown,
with the 8 ASG and the 2 PGM busses
Lower section shows details of channel selected,
including sources for sidechain, insert etc.
High-res frequency response graph for the
4-band EQ and 2-band Filters
Switchable between single channel and
alternate multichannel view
Indicators for the 24 Utility
busses are shown, with the 8
ASG, the 2 PGM, and the N-1 bus
High-res Dynamics (Compressor/Limiter and
Gate/Expander) transfer response graph
Enlarged process order icons, showing Insert
point, EQ and Filters, Fader, Dynamics and
Delay sections respectively Aux Send gain indicators, showing mono aux
level and stereo aux level/pan position, and
colour coded pre/post and on/off status Multi-purpose display momentarily
echoes the last parameter altered
on the selected channel