Samson SE50 - Manual (Page 5)

3
Using the SE50
1. Install the cable by connecting to the screw terminal
located at the bottom of the ear pad. Then install the
adapter that’s correct for your wireless body pack. Be sure
to tighten the locking ring to hold the adapter firmly in
place.
2. The microphone can be re-sized to fit nearly any size ear
simply by bending the wire into a new shape. Be sure to
fit the microphone’s ear pad behind your ear. Do not wrap
the ear pad around your ear. See the following graphic.
3. For optimal performance the microphone should be
positioned close to the skin and towards the corner of the
mouth, approximately a half inch away.
4. Once the microphone is in position, use the clothing cable
clip to restrain the cable to ensure the microphone stays in
place.
5. Position the moisture guard ring as close to the capsule as
possible.
6. For outdoor use and to help reduce p-popping, install one
of the included windscreens.