Sharp EJ-12GDW - Manual (Page 4)

3
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
and the Operation Manual
This product is intended for household use only.
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not
put base, cord or plug in water or other liquid.
3. Close supervision is necessary when the blender
is used by or near children.
4. Unplug from outlet when not in use, before putting
on or taking off parts and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate the blender with a damaged cord
or plug or after the blender malfunctions or is
dropped or damaged in any manner.
Call 1-800-BE-SHARP(237-4277) for service
information.
7. The use of attachments, including canning jars not
recommended by SHARP, may cause a risk of
injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or
counter or touch hot surfaces.
10. Keep hands and utensils out of jar while blending
to reduce the risk of severe injury to a person or
damage to the blender. A rubber or plastic
spatula may be used only when the blender is
not running.
11. Blades are sharp. Handle with care.
12. To reduce the risk of injury, never place blade
assembly on base without jar properly attached.
13. Always operate the blender with lid in place.
14. When blending hot liquids, remove pour lid. Be
careful not to spatter any hot liquids when
blending.
15. Do not use the blender for other than intended
use.
16. Do not leave the blender unattended during use.
This blender has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this
plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.