SUPER MICRO Computer X6DHi-G2 - Manual (Page 114)

C-24
X6DH3-G2/X6DHi-G2 User's Manual
To Set Physical Confi guration:
1. Turn on your computer and press Ctrl+A when prompted to access the ARC util-
ity.
2. Use the arrow keys to select "SerialSelect Utility" and press <Enter> to access the
Physical Confi guration submenu as shown below:
3. Select "Physical Confi guration" and press <Enter> to access SAS Device Confi gu-
ration submenu as shown below:
4. Use the arrow keys to select an item. Then, press <Enter> and the arrow keys to
confi gure the item selected.
5. To load default settings, press <F6>.
6. Press <Esc> to return to the previous menu and to exit the utility.