Samsung MPS-50 - Manual (Page 6)

6
CARE
To enjoy your MPS-50 for a long time:
• Keep the MPS-50 dry. If it gets wet,
wipe it dry immediately.
• Use and store the MPS-50 only in
normal temperature environments.
• Handle the MPS-50 gently and care-
fully. Don’t drop it.
• Keep the MPS-50 away from dust
and dirt.
• Wipe the MPS-50 with a damp cloth
occasionally to keep it looking new.
Modifying or tampering with the MPS-
50’s internal components can cause a
malfunction and invalidate its warranty.
If your MPS-50 is not performing as it
should, take it to your local RadioShack
store for assistance.
REPLACING THE FUSES
If the MPS-50 does not operate, the
power fuse under the AC socket on the
rear panel or the internal suppy fuses on
the printed circuit board might have
blown. If this happens, replace the fuses
with new ones of the same type, avail-
able at your local RadioShack store.
Important Notes:
• Let the MPS-50 cool down and see
if it starts again before you assume
a fuse needs to be replaced.
• Because the internal supply fuse is
located on the printed circuit board,
we strongly recommend that you
take it to your local RadioShack
store rather than attempting to
replace it yourself.
Caution: Do not use a fuse with ratings
other than those specified here. Doing
so might damage your MPS-50.
Power fuse 2 Amp 250V, slow blow
Internal supply fuse 3.5 Amp 250V, slow
blow
32-2046.fm Page 6 Monday, January 24, 2000 12:33 PM