Standard Horizon QUANTUM Series GX3500S - Manual (Page 56)

GX3500S Page 56
11.8 POSITION SEND
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. Your vessel must have an operating GPS receiver connected for
the GX3500S to send the position.
11.8.1 Setting up a Position Send Ringer
The GX3500S has the capability to turn off the Position Send ringer.
1. Press and hold down the [CALL(MENU)] key until
“Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
3. Press the [ENT] key, then select “DSC Beep” with the
CHANNEL selector knob.
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select “POS
Send.”
6. Turn the CHANNEL selector knob to select “Off.”
7. Press the [ENT] key to store the selected setting.
8. To exit this menu and return to radio operation mode
press the [16/9] key.
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL selec-
tor knob to select “On” in step “6” above.