Troubleshooting, Document camera issues, Chapter 7 – Smart Technologies Smart Document Camera 330 User Manual

Page 51

Advertising
background image

Chapter 7

Troubleshooting

Document camera issues

Use the following table to troubleshoot issues with your document camera.

Issue

Solution

No image displays or
appears.

•

Turn off your document camera (see page 16).
Securely connect all cables and connect the
camera’s AC adapter to a power outlet. Turn on
your document camera.

•

Adjust the zoom dial. The camera may be on a
blank section of your document.

•

Ensure the output switches on the side panel are
set to the proper image output:

–

VGA DVI-D or Composite on the side panel

–

NTSC or PAL on the bottom of your document
camera

No image displays after
you restart your
computer. Document
camera is connected
through a USB hub.

1. Turn off your document camera, and then wait

several seconds.

2. Turn on your document camera again.

The image is out of focus.

•

Press the auto focus

button.

•

Use the manual focus.

•

Move the camera further away from the object.

The image is scrambled
or black and white when
a television is the display
device.

Ensure the NTSC/PAL switch beneath the projector is
set correctly.

Advertising