Speco Technologies Color Dome Light Camera VL647iLT - Manual (Page 17)

- 17 -
4. Select HLC by using the Left and Right buttons then press the Set Up button to set up the desired HLC
area and GAIN level.
* Move the arrow indicator to RETURN and press the Set Up button after complete the SLC area set to
return to EXPOSURE menu.
* LEVEL : Adjust the HLC sensitivity by selecting between 0~8.
* DEFAULT : Press the Default to return to the factory default when input the wrong data .
HLC OFF HLC ON
① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
HLC
LEVEL
DEFAULT
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
RETURN
8
7
8
7
8
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.