Sony DVP-NS611H - Manual (Page 16)

16 US
6
Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 31)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 31)
7
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
8
Press X/x to select the type of jack
(if any) you are using to connect to
an audio component, then press
ENTER.
Select “NO,” if you do not connect an
audio component, then go to step 12.
Select “YES: LINE OUTPUT L/R
(AUDIO),” if you connect an audio
component using an audio cord, then go
to step 12.
Select “YES: DIGITAL OUTPUT,” if
you connect an audio component using a
digital coaxial/HDMI cord.
9
Press X/x to select the type of
Dolby Digital signal to your audio
component.
If your audio component has a Dolby
Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
10
Press ENTER.
“DTS” is selected.
11
Press X/x to select whether or
not to send a DTS signal to your
audio component.
If your audio component has a DTS
decoder, select “ON.” Otherwise, select
“OFF.”
12
Press ENTER.
Quick Setup is finished and connections
are complete.
b
When “PhotoTV HD” mode is activated (page 28),
the selection for “TV TYPE” is skipped.
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
48kHz/96kHz PCM:
AUDIO SETUP
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
STANDARD
ON
DOWNMIX: DOLBY SURROUND
DOLBY DIGITAL
D-PCM
DOLBY DIGITAL
AUDIO SETUP
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
STANDARD
ON
DOWNMIX: DOLBY SURROUND
DOLBY DIGITAL
DTS:
48kHz/96kHz PCM: OFF
OFF
ON