Samsung 800P - Manual (Page 18)

Get started
18
To disconnect the frame from a PC
Make sure to end the connection properly to prevent damage to the frame or your data.
Click
1
on the Windows Taskbar.
Click the pop-up message.
2
Safely remove USB Mass Storage Device - Drive(G:)
Disconnect the USB cable only when the message says that it is safe to remove the hardware.
3
Do not disconnect the USB cable while the files are being copied, as this could result in loss of data or damage to the frame. •
The connection will not end if you have frame files open on the PC. Close all frame files and try again. •
Transfer files from a PC (continued)