Setting return to standby mode, Sleep mode – Sanyo SCP-200 User Manual
Page 55
Setting Return to Standby Mode
This feature allows you to select the way to return to standby mode.
To set this feature:
1.
Press
to access the main menu.
2.
Select Settings and press
.
3.
Select Display and press
.
4.
Select Return to Idle and press
.
5.
A message appears. Press OK (left softkey) to continue.
6.
Select Automatically or End Key and press
.
Ⅲ
Automatically to return to standby mode automatically
in 30 seconds.
Ⅲ
End Key to return to standby mode by pressing
.
Note:
End Key
setting affects the battery’s talk and standby times.
Sleep Mode
This feature helps conserve your battery power by restricting the display
when the phone is not in use.
To set sleep mode:
1.
Press
to access the main menu.
2.
Select Settings and press
.
3.
Select Display and press
.
4.
Select Sleep Mode and press
.
5.
Select your desired option and press
.
Ⅲ
To deactivate this feature, select Off during step 5 above.
Section 2B: Controlling Your Phone’s Settings
49