Smeg Freestanding Cookers Gas FS61XPZ5 - Manual (Page 13)

Instructions for the user
15
5. DESCRIPTION OF CONTROLS
5.1 Front control panel
All the cooker controls and commands are on the front panel.
If the cooker is equipped with an electronic programmer, before using the
oven make sure that the symbol ; appears on the display. See
paragraph “6.1 Clock adjustment”.
DESCRIPTION OF SYMBOLS
FRONT RIGHT BURNER ELECTRIC OVEN
THERMOSTAT
BACK RIGHT BURNER ELECTRIC OVEN
FUNCTION KNOB
BACK LEFT BURNER
FRONT LEFT BURNER
HOB BURNER COMMAND KNOB
The flame is lit by pressing the knob and turning it
anticlockwise to minimum flame . To adjust the
flame turn the knob between maximum ( ) and
minimum ( ). The burner goes out when the knob is
returned to the position .
ELECTRIC OVEN THERMOSTAT KNOB
(CERTAIN MODELS ONLY)
Selection of cooking temperature is carried out by
turning the knob clockwise to the required
temperature, between 50° and 260°C.
If the appliance has an electric oven, the warning
light will come on when the oven is heating up. When
it goes out it means that the required temperature
has been reached. Regular flashing means that oven
temperature is being constantly maintained at the
programmed level.