Sanyo CE42LM5WP - Manual (Page 75)

7
STARTING THE DRIVER CONTROL PROGRAM
Connect the touchscreen cable to a free serial port of the.
1. If the Touchscreen control panel is not already running, start the driver by clicking the icon on
the desktop or select the Windows™
START button and RUN "Ma7_Control_En.exe" with the
necessary path or double click Ma7_Control_En.exe from ‘Windows Explorer™’ or click the
short cut placed on the desktop.
When the program is started it displays the following window (Fig 1):
Fig 1
CONFIGURING THE COMMUNICATIONS PORT
When the program has loaded:
1. Select the
Comms tab.
2. Select the comm port the Touchscreen is connected to.
3. Make sure the driver box called
' Present' is red and select the appropriate port that the
touchscreen is connected to.
4. Select a Baud rate of 19,200.
5. Tick the
' Open ' box in the Status section.
6. When the driver recognizes the screen, the Open , Active and Valid boxes will go red (fig 2).
7. The button called Reset will reset the touchscreen driver when pressed.