Sony HANDYCAM DCR-PC1000 - Manual (Page 102)

102
DCR-PC1000 2-591-678-11(1)
 (Eject cassette warning)*
Slow flashing:
• The write-protect tab on the cassette is
set to lock (p. 107).
Fast flashing:
• Moisture condensation has occurred (p.
113).
• The self-diagnosis display code is
displayed (p. 101).
 (Warning indicator pertaining to
image deletion)*
• The image is protected (p. 69).
 (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)*
• The write-protect tab on the “Memory
Stick Duo” is set to lock (p. 108).
(Warning indicator pertaining to
the flash)
Slow flashing:
• Still charging
Fast flashing:
• The self-diagnosis display code is
displayed (p. 101). *
• There is something wrong with the
flash.
(Warning indicator pertaining to
camera-shake warning)
• The amount of lights is not sufficient,
so camera-shake easily occurs. Use
the flash.
• The camcorder is unsteady, so
camera-shake easily occurs. Hold the
camcorder steady with both hands and
shoot the image. However, note that
the camera-shake warning indicator
does not disappear.
* You hear a melody when the warning indicators
appear on the screen (p. 57).
Description of warning
messages
If messages appear on the screen, follow
the instructions.

Battery
Use the “ InfoLITHIUM” battery pack
(p. 110).
Battery level is low.
• Change the battery (p. 9, 110)
Old battery. Use a new one (p. 110).
Re-attach the power source (p. 9).

Moisture condensation
Moisture condensation. Eject the
cassette (p. 113)
Moisture condensation. Turn off
for 1H (p. 113).
 Cassette/Tape
Insert a cassette (p. 17).
Reinsert the cassette.
• Check if the cassette is damaged.
The tape is locked - check the
tab (p. 107).
Warning indicators and messages (Continued)