Symbol Technologies CDM-8910WW - Manual (Page 7)

C
H
1
13
C
H
1
12
BATTERY USAGE BATTERY USAGE
• The battery is not charged at the time of purchase.
• Fully charge the battery before using it for the first time.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
• Phone LED will light red and “Charging...” will be displayed on
the screen while charging is in progress.
• Phone LED will light green and “Charging is complete!” will be
displayed on the screen when the battery is fully charged.
• Typical charge times for a full charge.
Standard Batteries : 2~3 hours/Extended Batteries : 3~4 hours
1 Plug the AC Charger into a standard outlet.
2 Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed on the phone.
BATTERY CHARGING
POWER CONNECTION
BATTERY STANDBY TIMES
The operating time is subject to your handset usage and configuration.
BATTERY TALK TIMES
The operating time is subject to your handset usage and configuration.
These times are for a new battery. Talking and Standby time may
decrease over time.
CDMA PCS AMPS
200 m 190 m 80 m
330 m 330 m 130 m
STD 1000 mAh
Battery Capacity
EXT 1700 mAh
CDMA PCS AMPS
107~190 hours 150~250 hours
160~220 hours 380~450 hours
20 hours
35 hours
STD 1000 mAh
Battery Capacity
EXT 1700 mAh