Operations, 1 your new hob with touch-control operation, 2 touch-control keys – Smeg SE2631TC User Manual
Page 19: 3 touch-control operations
224379
19
1.
Operations
1.1 Your new hob with Touch-Control operation
This manual covers the model SE 2631 TC.
1.2 Touch-Control keys
After the supply voltage has been connected (mains connection), a self-test is carried out which is concluded when
a short acoustic signal is to be heard.
On/off key (control)
Locking key
Control lamp lock (control)
Minus key
Plus
key
Cooking zone key
Cooking level display
Cooking zone stand-by dot
(lit: cooking zone can be used)
1.3 Touch-Control operations
Each key operation is always confirmed by an acoustic signal.
Pressing the on/off switch key
switches on the control system. Put your finger on the button until a “0” lights up
at all of the cooking level displays and the cooking zone stand-by dot
flashes. The next action must be carried
out within ten seconds, otherwise the control system will automatically switch off again.
To switch on a cooking zone, press the corresponding cooking zone key
of the required cooking zone. The
appropriate cooking zone stand-by dot
of the activated cooking zone lights up.
Select a cooking level from 1 to 9 by means of the minus or plus keys
/
. When switched on, each cooking zone
can be switched off again at any time. To do this, the required cooking zone must be activated; the cooking zone
stand-by dot
lights up.
The minus key
can be used to turn the cooking level down to “0”; if the minus and plus keys
+
are pressed
at the same time, the cooking zone can be switched off directly.
In all cases the complete control system can be switched off at any time by pressing the on/off key
. To switch
off the entire cooking range place your finger briefly on the on/off key
until the control lights go out.
Pressing locking key
prevents all the keys - with the exception of the on/off key
from being operated by
mistake. Successful locking is indicated by the control lamp
. Pressing the locking key
cancels this command
again.
Residual heat display
Residual heat is displayed by means of an illuminated “H” on the appropriate cooking level display
.