Sony ICD-SX800 - Manual (Page 49)

ICD-SX700/SX800 4-127-580-11(1)

GB
Re
co
rd
in
g
Recording with an
External Microphone
Stereo
microphone
To the
(microphone)
jack


 ,


Tip
Before you start recording, we recommend
you make a trial recording first.
1
Connect an external microphone to
the  (microphone) jack when the
IC recorder is in the stop mode.
“SELECT INPUT” appears in the display
window.

2
Press  or  to select “MIC IN,”
then press  .
3
Press  (record/pause) to start
recording.
The built-in microphones are
automatically cut off.
If the input level is not strong enough,
adjust the recording level on the IC
recorder.
When a plug in power type
microphone is connected, power
is automatically supplied to the
microphone from the IC recorder.
Note
If “SELECT INPUT” is not displayed, set it in the
menu (page 89).
Recommended microphones
You can use the Sony ECM-CS10, or ECM-CZ10
electret condenser microphone (not supplied).

