Sanyo DP26640 - Manual (Page 8)

8
Need help? www.sanyoctv.com 1-800-877-5032
TURN ON TV (PRESS POWER BUTTON)
Wait for on-screen instructions to set an
Initial Energy Saving Mode, and perform an
Initial Channel/Signal Search.
PLUG IN AC POWER CORD
120V AC, 60Hz
GETTING STARTED
INITIAL CHANNEL SEARCH
Before proceeding, please make sure to hook up
your antenna or cable connection and all AV
equipment correctly to your HDTV.
AV INPUT SELECTION
Press the INPUT key to select the correct AV
input for the video source you wish to watch.
TV SET LOCATION SELECTION:
Select “Home Mode” by pressing the CH
▼ key to set
the HDTV’s backlight to an Energy Star qualified level,
or select “Store Mode” by pressing CH
▲ to set the
backlight to a retail display level.
CHANNEL AND SIGNAL SETUP SCREEN
The final setup screen displays analog and digital
channels found as well as AV inputs detected. Pressing
the CH
▲▼ key finalizes the setup process.
NOTE: To repeat the initial setup process press MENU.
Press the CH
▲▼ key to perform a channel
search from an Antenna or a direct Cable
connection, and a signal search from devices
hooked up to the HDTV’s AV input jacks.
CHANNEL AND AV SIGNAL SEARCH:
Please select the proper location for your TV,
the display will be adjusted for best results.
Home mode is for saving energy and reducing power consumption,
this setting qualifies for ENERGY STAR.
Store mode is for the retail display setup.
Press CHannel UP for Store Mode.
Press CHannel DOWN for Home Mode.
INITIAL CHANNEL/SIGNAL SEARCH
SETUP SCREEN
CHANNEL SEARCH PROGRESS SCREEN
Please connect all antennas* and signals to the jacks and terminals.
Make sure all of your equipment is switched on.
*
Press CHannel UP or DOWN for Channel/Signal search.
To avoid signal interference when searching for channels using
an Indoor Antenna, place the antenna at least 3 feet away from TV.
Channel and Signal Setup:
Analog Channels...16 Digital Channels...24
Video 1...Yes HDMI 1...Yes
Video 2...no HDMI 2...no
Video 3...no HDMI 3...no
The search was successfully completed!
Press CHannel UP or DOWN to finish the Setup process.
If you are having problems, call us toll-free at 1-800-877-5032
Press MENU to repeat the process.
INITIAL ENERGY SAVING
MODE SCREEN
CHANNEL/SIGNAL LIST SCREEN