Samsung AD68-00752S - Manual (Page 2)

S-VIDEO
MEMORY CARD
TAPE
MIC
A/V
DC IN
S-VIDEO
S-VIDEO
A/V
TV
CAMCORDER
VIDEO
AUDIO(L)
AUDIO(R)
REC SEARCH FADE BLC
REV FWD S.SHOW
EASY
MULTI DISP.
PHOTO
TAPE PLAYBACK
1.Connect the camcorder to a TV with the AUDIO/VIDEO cable.
■ The yellow plug : Video
■ The white plug : Audio(L) - Mono
■ The red plug : Audio(R)
2. Set the mode switch to the TAPE position.
3. Set the power switch on the camcorder to PLAYER mode.
4. Using the (FF) and (REW) buttons, find the first position
you wish to play back.
Press the (PLAY/STILL) button.
1. Turn the Power switch to OFF.
2. Insert the Memory Card into the Memory Card slot located on
the bottom of the camcorder, in the direction of the arrow.
3. Set the mode switch to MEMORY CARD.
4. Set the power switch to the CAMERA mode.
5. ■ Still Image : ➀ Press the PHOTO button to record a picture.
■ MPEG4 : ➀ Press START/STOP button to start recording.
(up to 20 seconds)
DSC Recording
1 3
4 5 5
2
1 2 3
4
1. Turn the Power switch to OFF.
2. Insert the Memory Card into the Memory Card slot located
beneath the camcorder, in the direction of the arrow.
3. Set the mode switch to MEMORY CARD.
4. Set the power switch to the PLAYER mode.
5. Select the Storage Media (MPEG4,PHOTO) to playback
➀ Press the MENU button and move the MENU SELECTOR
to highlight MEMORY.
➁ Push the MENU SELECTOR to enter sub-menu.
➂ Use the MENU SELECTOR to select MPEG4(PHOTO)
from the sub-menu. (M. PLAY SELECT)
➃ To exit the menu, push the MENU button.
DSC PLAYBACK
3
1 2
4
THETA2-Quick Guide-(D303) 5/21/04 10:53 AM Page 2