Sharp AR-F152 - Manual (Page 20)

18
2
Making copies
BYPASS FEED
Print face
Press the tray select ( ) key to select the bypass tray. Set the number of copies if
using standard copy paper. Press the print ( ) key.
TWO-SIDED COPYING
Two-sided copying can be made on this copier using the bypass tray.
Example: The following two originals will be copied onto two sides of copy paper.
Face up
First original Second original
Face up or face down
Face down
Place the first original on the original table and make a copy.
The first copy can be made using either the paper tray or the bypass tray.
Replace the first original with the second original on the original table and close the
original cover. Make sure that the first and second originals are oriented in the same
way on the original table.
Both the first and second originals can be set in the SPF but they must be set
separately. If the stream feeding mode for the SPF has been enabled, set the
second original after the SPF (
) indicator goes out. See page 15.