Sunwave Tech. SRC-3820 - Manual (Page 22)

SRC-3820 User’s Manual
16
Selecting a code automatically
1. Turn on the target device that you
want to control.
2. Select a device you desire to
program in (TV for example).
3. Point the SRC-3820 at the target
device. Tap the AUTO key. An
“AUTO” message will be showed
on screen while the SRC-3820 is
automatically detecting
compatible codes. When the
device has been turned off, you
are required to press any button
or tap any key to stop searching
right away.
4. To make sure the code number is
compatible with the target
device, please press the POWER
button
for testing. If the
device can be turned on by SRC-
3820, you might take right code.
For more identification, go on
trying other keys. If code is
incorrect, please return to Step 3
to try another code until the end.
Note: Some codes may be
compatible for several
models.
5. If code is correct, please press
to confirm settings and exit.