Sony Video Projector VPL-VW90ES - Manual (Page 81)

81
Oth
e
rs
2
Push and remove the battery at an
angle.
3
Insert the new battery CR2032.
4
Insert a coin, etc, into the slot of the
battery cover, turn it in the direction of
the arrow, then close the battery cover.
5
Align the z mark and the z ( ) mark.
When opening or closing the battery cover,
make sure the coin, etc., is properly inserted in
the groove of the battery cover.
On cleaning the 3D glasses
• Clean the 3D glasses gently with a soft dry
cloth.
• Stubborn stains may be removed with a
cloth lightly dampened with mild
detergent solution, followed by wiping
with a soft dry cloth.
• When using the wipes, follow the
instructions on the package.
• Never use solvent such as alcohol,
benzene or thinner.
Repurchase/additional purchase
You can purchase the following optional 3D
glasses. (The model is current as of October
2010.)
• TDG-BR100
• TDG-BR50
When you purchase optional 3D glasses, attach
the filter attachments supplied with the 3D
glasses. You cannot watch 3D video images
without the filter attachments attached to the
3D glasses.
Note
Push here and
remove the
battery at an
angle.
Battery (CR2032)
Note