3d glasses – Sony Video Projector VPL-VW90ES User Manual
Page 11
11
Lo
ca
tion
o
f C
o
nt
ro
ls
3D Glasses
1
Slide switch
Set the switch for a comfortable fit (
2
Battery cover
Detach the cover when replacing the
battery (
3
LED indicator
Flashes one time every 3 seconds: Power
on
Flashes three times every 3 seconds:
Low battery. Battery capacity is almost
running out.
Flashes three times: Power off
4
IR sensor
Receive signals from the 3D Sync
Transmitter.
IR’s entry angle differs according to
distance or usage environment.
Please keep this face clean.
5
Filter attachment
Filters are attached to view the 3D video
images.
Do not remove the filters. You cannot view
the 3D video images without them.
6
Power button
Power on: Press once
Power off: Hold power button down for
2 seconds
* Auto power off: More than 5 minutes
without IR signal
7
Nose pad
Adjust the nose pad for a comfortable fit.
8
Temple frames
You can bend (adjust) the temple frames
for a comfortable fit.
Note
Before use: Remove
the battery’s insulating
sheet before using the
product for the first time.
This part receives IR
(infrared rays) from the
3D Sync Transmitter.
Note