Suzuki Automible 2008 Forenza - Manual (Page 25)

1-13
SEATS AND RESTRAINT SYSTEMS
85Z04-03E
To unlatch the belt, just push the button on
the buckle.
Rear Center Seat Belt
The rear center safety belt system includes
a retractable safety belt, a detachable con-
nector, and a buckle with red release but-
ton. The rear center safety belt buckles are
designed to prevent insertion of the wrong
latch plate.
When the rear seatback is in an upright
position, keep the detachable connector
latched. Only unlatch the connector when
you fold down the rear seat back.
Before fastening the rear center belt, push
the connector latch plate (1) at the end of
the safety belt strap into the connector and
make sure the webbing is not twisted. To
fasten the belt, sit up straight and well back
in the seat, pull the latch plate (A) across
your body and press it into the buckle (B)
until you hear a “click”.
To unfasten the belt, push the red button
on the buckle (B) and allow the belt to
retract.
When folding down the rear seat back,
insert a narrow-ended tool into the groove
(1) located on the connector and allow the
belt to retract.
After returning the rear seatback to the
upright position, push the connector latch
plate (1) at the end of the safety belt strap
into the connector and make sure the web-
bing is not twisted.
WARNING
You can be severely hurt if your
shoulder belt is too loose. In a crash,
you would move forward too much,
which could increase injury. The
shoulder belt should fit against your
body.
L3U1067A
S8U1001A
(1)
(A)
(B)
(B)
S5U1003A
Safety Belts: