Sanyo DP37647 - Manual (Page 4)

4 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
PROTECTING THE LCD DTV
SCREEN
The screen is likely to be damaged if it is not main-
tained properly. Do not use hard objects such as hard
cloth or paper. Do not use
excessive pressure when clean-
ing the screen; excessive
pressure can cause permanent
discoloration or dark spots.
NEVER spray liquids on the
screen.
REMOVING THE DTV STAND
(Optional)
Tools Needed: Phillips screwdriver
Important Note: Place DTV face down on a
padded or cushioned surface to protect the
screen and finish. Handling by more than two
people is recommended.
1 Remove four (4) screws from the metal bracket.
CAUTION: Hold the stand firmly as you remove
the last screw.
2 Carefully remove the DTV stand.
WALL MOUNTING (Optional)
Use the threaded inserts
on the back of your DTV to
secure it using a wall
mounting kit.
DP37647: 200 x 200
(VESA standard interface)
DP42647: 400 x 400
(VESA or UNIVERSAL
standard interface)
Note: Wall Mounting kit is not supplied.
Mounting screws measurements:
DP37647—M6 Diameter, Length—12mm (maximum).
DP42647—M6 Diameter, Length—12mm (maximum).
POSITIONING THE LCD DTV
Always use an appropriate table or stand when
positioning your DTV. Do not position the
DTV in a confined area. Allow adequate
space for proper ventilation.
Model DP37647
Model DP42647
Note: All dimensions are in inches.
DTV Back View
HANDLING PRECAUTIONS
• Handle by the cabinet only. Never touch the
screen when handling.
• Excessive pressure on the screen can cause
permanent discoloration or dark spots.
• Handling damage is not covered under
warranty.