Silvercrest KH 2029 User Manual

Page 12

Advertising
background image

- 10 -

Interrupting the alarm

•

Press the

SNOOZE

button to interrupt the alarm

for 10 minutes.

Set snooze time

•

Press the

MODE

button seven times; the screen

displays the snooze time set
(default is SNO10).

•

Use the

UP

and

DOWN

buttons to set the snooze

time to a time between 1 and 59 minutes.

Turning off the alarm function

•

Press the

VOL.+/AL–1

or

VOL.–/AL–2

button until

the relevant alarm symbols disappear from
the screen.

Stop watch function

The stop watch function is only available when the
radio is switched off.

•

Press and hold down the

PAGE

button for around

2 seconds, the screen shows 00.00.0 U.

•

Press

SNOOZE

to start the stop watch. The maxi-

mum time for the stop watch is 99 minutes and
59 seconds. If the stop watch exceeds the maxi-
mum time, 99:59.0 is displayed and flashes.

•

During time measurement, it can be stopped by
pressing

SNOOZE

.

•

Pressing

SNOOZE

again restarts the stop watch.

•

Hold down

SNOOZE

to reset the stop watch.

•

Leave the stop watch by pressing

PAGE

.

Countdown function

The countdown function is only available when
the radio is switched off.

Set and save countdown

•

Press and hold down the

MEMORY SCAN

button

for around 2 seconds, the screen shows
D 00.00.

•

Press the

UP

or

DOWN

button to set the

desired time.

5 countdown times are preset on the memory
buttons and you can open these directly using
the corresponding memory button:

Button

M.0/5

10:00

Button

M.1/6

30:00

Button

M.2/7

45:00

Button

M.3/8

60:00

Button

M.4/9

90:00

•

Press the

MEM

button to save the set time, the

memory space indicator

MEM

flashes on the

screen. Now use the

M.0/5

–

M.4/9

buttons to

select a memory space; when you press the
relevant memory key the time is saved in this
memory space and the time previously stored
there overwritten.

•

When the

MEMORY SCAN

button is pressed again

you leave the countdown mode.

Call up and activate the countdown function

•

Press and hold down the

MEMORY SCAN

button

for around 2 seconds, the screen shows
D 00.00.

•

Select the desired, saved countdown time with
the aid of the

M.0/5

–

M.4/9

memory buttons.

•

Press

SNOOZE

to start the countdown. Pressing

the

SNOOZE

button again pauses the countdown.

IB_KH2029_AR23586_LB3C 18.08.2008 15:56 Uhr Seite 10

Advertising