Sharp MD-MX30 User Manual
Page 15
14
MINIDISC OPERATION
1
Press the ON/STAND-BY button to turn the power on.
2
Press the MD
■
button.
3
Load a MiniDisc in the direction indicated by the ar-
row on the MiniDisc, with the labeled side facing up.
●
The disc name will be displayed only when the name has
been programmed onto the disc.
Disc name
●
The total number of tracks and the total playing time on
the MiniDisc will be displayed.
Total number of tracks Total playing time
4
Press the
MD
06
06
06
06
06
button.
●
If the track name has been programmed on the MiniDisc,
it will appear and scroll across the display.
●
If the MiniDisc has no track names, only the elapsed play-
ing time will appear.
●
When the last track has been played back, the unit will
stop automatically.
To interrupt playback:
Press the MD
06
button.
●
"
6
" will appear.
●
Press the MD
06
button again to resume playback from
the same point.
To stop playback:
Press the MD
■
button.
To remove a MiniDisc:
Press the
7
button.
Caution:
●
Do not carry the unit with a MiniDisc left in the MD
compartment. The disc may come loose inside the unit
and it may be damaged or cause damage to the unit.
This may also cause malfunctions.
●
If TV or radio interference occurs when using the MiniDisc,
move the unit away from the TV or radio.
●
Although MiniDiscs will not normally skip due to vibration,
you may hear skipping in the sound if there is continuous
vibration.
If the volume is turned up too high, sound skipping may
occur depending on the contents of the MiniDisc.
If this happens, turn the volume down and the skipping
should stop.
●
If an error message is displayed during MiniDisc opera-
tion, see "ERROR MESSAGES" on page 39.
■
MiniDisc playback
3
1
4
2
1
4
7
7
7
7
7
2
Label side up