Sanyo Proj05 - Manual (Page 38)


Chapter 4 Controlling the Projector
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Item Description
Screen ..................... Switches the screen mode. (Normal,
Zoom, True, Natural wide, Full, Custom)
Ceiling ..................... Sets the image top/bottom and left/
right reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON,
OFF)
* See the next page for the description of other functions.
Screen setting
This function is to adjust the screen mode or the lens functions of the projector.
✐
Natural wide cannot be selected when 720p, 1035i, 1080i, 1080p or 1080psf is selected in AV sys-
tem menu.