Bostitch PNEUMATIC STICK NAILER F21PL2 - Manual (Page 7)

FASTENER DEPTH CONTROL ADJUSTMENT
When using the framing contact arm:
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just
above the work surface to shallow or deep countersink.
TO ADJUST THE FASTENER DEPTH CONTROL:
Disconnect tool from air supply before attempting any parts disassembly and before
changing the work contacting element adjustment.
1. Push in on locking button.
2. Adjust contact arm up to increase depth
of drive or down to decrease it.
3. Release locking button
DIRECTIONAL EXHAUST DEFLECTOR
The adjustable exhaust deflector can be rotated into any desired position by hand without the use of any tools.
REMOVING NAILS
2. ADJUST
1. PUSH IN
3. RELEASE
LOCKING BUTTON
CONTACT ARM
VIEW 3 PAGE 7
1. Pull pusher back until it engages latch.
2. Slide nails back to opening and push out.
7
Exhaust Deflector
Note: Metal Connector Attachment
is not adjustable for depth control.
PULL BACK ON PAWL
TO RELEASE NAIL STICK