Samsung HL-P5085W - Manual (Page 90)

English - 90
Appendix
• For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves.
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the
protective circuit).
1 Unplug TV, then remove the 7
screws.
2 Remove the rear cover.
3 Remove the 2 press-pin
screws the Lamp.
4 Separate the Lamp from the
engine by holding the handle
and pulling it out.
5 To reinstall the Lamp, follow
these steps in reverse order.
BP68-00352A-00(78~91) 6/18/04 4:29 PM Page 90