Spalding 214782A - Manual (Page 18)

18
P/N 214782A 10/03
1.
Place assembled unit to desired location. Fill tank with water (28 gallons (114 liters))
or sand (360 lb. (163 kg)) and snap tank cap (28) in place.
Secure system rigidly to a flat,
solid (preferably concrete)
surface using lag bolts or a
similar anchoring system
through holes in support
feet as shown.
This step must be done to
conform to EN1270
standards.
SECTION D: SECURING THE SYSTEM
28
ADD TWO GALLONS (7.6
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
CAUTION!