Setting the test tone – Samsung HT-DS100 User Manual

Page 47

Advertising
background image

Setting the Test Tone

Press the Test Tone to check the speaker connections and to adjust the speaker levels.

L: Front Speaker (L)

C: Center Speaker

SW: Subwoofer

R: Front Speaker (R)

LS: Rear Speaker (L)

RS: Rear Speaker (R)

Press

RETURN

button to return to the previous level.

Press

MENU

button to exit the setup screen.

46

SETUP

2

1

In Stop mode,
press

MENU

button.

Press Cursor
button to move to
‘Audio’ and then
press

ENTER

button.

3

Press Cursor button
to move to ‘TEST
TONE’ and then press

ENTER

button.

•

The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.

To end the test tone,
press

TEST TONE

button.

Press

TEST TONE

button.

•

Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.

•

Use this function to check that each speaker is
correctly connected and that there is no problem.

When manually testing using the

TEST TONE

button

Multi-Channel Pro Logic Mode

Start

35P~64P(DS100)-SECA GB 11/10/04 8:53 AM Page 45

Advertising