Sega Satellite TV System - Manual (Page 9)

40 www.seuservice.com
www.seuservice.com
41
Use the cord clamp inside the satellite
to secure the communication cables
(Photo 6. 4 e).
Near the cable exit, make loops in the
communication cables with a diameter
of at least 6 cm. Use the repeat tie belt
to secure the looped communication
cables (Figure 6. 1 l).
Run the communication cables through the slit
on the fiber guide plate (Photo 6. 4 f).
Secure the fiber guide plate using the 2 screws
(Photo 6. 4 g)
Arrange the communication cables. Use a wiring
cover to protect them.
Secure the communication cable
by using the cord clamp.
PHOTO 6. 4 e
FIBER GUIDE PLATE
PHOTO 6. 4. f
PHOTO 6. 4 g
SCREW (2)
M4×30
PHOTO 6. 4 h At the end of the work
10
9
8
7
11