Procedure for installation and configuration – Siemens Simens Gigaset WLAN dsl/cable SE551 User Manual

Page 15

Advertising
background image

15

The Gigaset SE551 WLAN dsl/cable

Gigaset SE551 WLAN dsl/cable / ENG / A31008-M1029-B101-2x-7619 / introduction.fm / 03.11.2008

Sc

hablone 200

4_12

_27

Procedure for installation and configuration

1. First install an Ethernet network card or a wireless

Network adapter

such as the

Gigaset PC Card 108 or the Gigaset USB Adapter 108 in the PCs you want to connect
to the Gigaset SE551 WLAN dsl/cable. The installation is described in the products'
user guide.

2. Then make the necessary connections (PCs, modem) to the Gigaset SE551 WLAN

dsl/cable and switch the device on (see section "Connecting the Gigaset SE551
WLAN dsl/cable" on page 20)
.

3. Before the PCs can communicate with the Gigaset SE551 WLAN dsl/cable and with

each other in a local network, you have to change their network settings. Configure
these network settings on one PC first so that it can establish a connection to the
Gigaset SE551 WLAN dsl/cable. You can then use this PC to configure the device.
To find out how to do this, read the document entitled “Network configuration” on
the CD.

4. In a wireless connection you establish the link from the PC's wireless network adapt-

er to the Gigaset SE551 WLAN dsl/cable. This is described in the user guide for the
network adapter.

5. Then configure the Gigaset SE551 WLAN dsl/cable to activate the device's Internet

access (refer to the section "Basic Setup Wizard" on page 29). This will require the
access data from your Internet service provider.

u

If you want to connect more PCs to the Gigaset SE551 WLAN dsl/cable, configure
their network settings so as to set up the local network (refer to the document enti-
tled “Network configuration” on the CD).

u

If you want to use the Gigaset SE551 WLAN dsl/cable's other functions e.g. the com-
prehensive security features, use the router's Security Setup (see page 34) or the
Advanced Settings menu (see page 43).

Please remember:
When installing wireless network adapters, use the default

SSID

for the Gigaset

SE551 WLAN dsl/cable: ConnectionPoint.

Advertising