Sony DDU100E - Manual (Page 18)

18
■ F. GND tab
Connect the F. GND tab to one of the host computer’s ground cables
unless the frame of the drive unit is in direct contact with the
computer’s chassis (a situation not likely under normal
circumstances).
The frame ground cable recommended is the one using an AMP 1-
480435-0 housing and 170203-2 or 60711-1 contact.
■ AUDIO OUT connector
The pin assignment is as follows:
pin Audio Signal
1 R singal
2 R ground
3 L ground
4 Lsignal
Installing the Drive Unit in Your Computer
F. GND tab
Frame ground cable