Cd or mp3/wma disc playback – Sharp CD-SW200 User Manual

Page 19

Advertising
background image

03/12/19

CD-SW200 15-25.fm

19

CD-SW200

CD or MP3/WMA disc Playback

Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.

After the last track on the fifth disc is played, the unit will stop au-
tomatically.

When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.

To exchange other discs while playing a disc:

Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.

To remove the discs:

In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.

Caution:

Do not place two discs in one disc tray.

Do not play discs of special shapes (heart, octagon, etc.) as it
may cause malfunctions.

Do not push the disc tray while it is moving.

If the power fails while the tray is open, wait until the power is re-
stored.

If the disc tray is stopped with force, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.

If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.

If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.

Various disc functions

Function

Main unit

Remote

control

Operation

Play

Press in the stop
mode.

Stop

Press in the playback
mode.

Pause

Press in the playback
mode. Press the /
button to resume play-
back from the paused
point.

Track up/
Track down

Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the / button
to start the desired
track.

Fast for-
ward/Fast
reverse

Press and hold down
in the playback mode.
Release the button to
resume playback.

Advertising