Sony SLV-EZ727AZ - Manual (Page 12)

12 Getting Started
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types of batteries together.
• Some buttons may not work with certain Sony TVs.
Controlling other TVs with the remote commander
(SLV-EZ727AZ only)
The remote commander is preprogrammed to control non-Sony TVs. If
your TV is listed in the following table, set the appropriate manufacturer’s
code number.
1
Set •TV/VIDEO at the top of the remote commander to •TV.
2
Hold down ?/1, and enter your TV’s code number using the
programme number buttons. Then release ?/1.
Now you can use the following TV control buttons to control your TV:
?/1, VOL +/–, PROG +/–, programme number buttons, -/-- (ten’s digit) and
TV/VIDEO.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
Step 2 : Setting up the remote commander (continued)
Manufacturer Code number
Sony 01, 02
Akai 68
Ferguson 52
Grundig 10, 11
Hitachi 24
JVC 33
Loewe 45
Mivar 09, 70
NEC 66
Nokia 15, 16, 69
Manufacturer Code number
Panasonic 17, 49
Philips 06, 07, 08
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson 43
Toshiba 38