Siemens Gigaset 4210 - Manual (Page 9)

3
Setting Up the Telephone
Gigaset 4015 Comfort, USA, A31008-G4015-B102-1- vorberei.fm 24.08.0
Connecting the Base Station
● Only use the power supply unit included as indicated on the
underside of the base.
● Use the telephone cord supplied. Do not use any old cords.
● Do not use an outlet controlled by a wall switch.
Power supply unit
with cord
(110 VAC/60 Hz)
● Insert the
small plug on
cord into pho-
ne jack
● Place cord in
the base cable
channel,
● insert power
supply unit
into wall out-
let.
● Insert plug on the telephone cord into telephone jack on
base unit (clicks into place),
● Place cord in cable channel on the bottom of the base,
● Insert other end of plug into telephone jack on the wall.
● The installation of the base unit should allow at least 8 inches
between the base and persons to be in compliance with FCC
RF exposure guidelines
Telephone jack with telephone cord
Key to register
additional
handsets/Page
handsets.
1
2