Sony DVP-FX850 - Manual (Page 40)

40
Connecting to an AV amplifier (receiver)
Example 1
To send the playback signal to an AV amplifier (receiver)
1
Set the LINE SELECT switch on the player’s right side to “OUT.”
* The yellow plug is used for video signals (page 39).
Example 2
To send the playback signal to an AV amplifier (receiver)
1
Set the LINE SELECT switch on the player’s right side to “OUT.”
2
Set “Digital Output” to “On” in “Audio Setup” (page 35).
DC IN
9.5V
LINE SELECT AUDIO VIDEO PHONES
OPTICAL
OUT
A B IN OUT
Stereo amplifier
To AUDIO
Audio/video cord (supplied)
To AUDIO input
DC IN
9.5V
LINE SELECT AUDIO VIDEO PHONES
OPTICAL
OUT
A B IN OUT
Amplifier with Dolby Digital
or DTS decoder
To OPTICAL OUT
Optical digital cord (not supplied)
To AUDIO input